Author Topic: GRAMPIAN PRIDE rescue vessel refurb  (Read 212 times)

0 Members and 2 Guests are viewing this topic.

Offline rondean

  • First Sea Lord
  • Admiral
  • *
  • Posts: 709
GRAMPIAN PRIDE rescue vessel refurb
« on: 15 April 2024, 16:26:22 »
Hi
 Another refurb of the older models in the showroom, this one is approx 12 years old.
 Old 27mg radio and bobs board and motor stripped out and new Nimh batteries, ESC and  motor fitted, linked through 1 x10amp ESC plus a battery for the bow thruster and a lot of ballast.
 We spent a lot of time getting the balance spot on and motor fitted in cradles with foam pads to insulate from the hull, Double coupling,
 Tested on a very windy day. but it was nice a sunny until we got to the lake she handled a treat just as the sun was setting, hoping to get a nice atmospheric shot into the sunset ,
 maybe we can get her out again in the sunshine and no wind.
 Model is  1/48th scale, length 830mm  beam 200mm running on 1 x falcon 5 motor on 6 volt NiMh batterie. and a 108-02 bow thruster on 6 volts
 Regards
 Ron
 see her here on you tubehttps://www.youtube.com/watch?v=mOwMdd4BWrk