Post Reply

Warning - There has been no post in this topic for at least 120 days.
Please consider starting a new topic unless you are sure you want to reply.

Note: This post will not be displayed until it has been approved by a moderator.

Name:
Email:
Subject:
Message Icon:

Attach:
(Clear Attachment)
(more attachments)
Allowed file types: gif, jpg, pdf, png, jpeg
Restrictions: 8 per post, maximum total size 800KB, maximum individual size 100KB
Note that any attached files will not be displayed until approved by a moderator.
Verification:
Spammers have become a daily problem that's why we have to revert to such measures, Please enter "OUR" post code (without the space), in the box below, Our Postcode can be found in our Logo at the top of this page:

Shortcuts: Alt+s to submit/post; Alt+p to preview


Topic Summary

Posted by: Kiyoshi Sekiguchi
« on: 16 March 2021, 12:03:03 »

Hi Ron;
I have understood the historical background of the waterline set along the hull.
The U boats were so terrific threat to RN ships to such an extent that even
water lines had to be disguised ingeniously....
Thank you for your encouragement as usual.
Kiyoshi
Posted by: Kiyoshi Sekiguchi
« on: 16 March 2021, 11:37:49 »

Hi Pegasus;

Thank you for your kind advice,useful information and the encouragement.
Everything on my committing to the sailing quality will be made clear after
coming April through late May during when several tests will be done.
Even now I am satisfied 85 % with the present sailing quality.
I am intending to make it over 90% which is the qualified level for me. :D :grin1:

Posted by: rondean
« on: 15 March 2021, 14:05:26 »

 Hi Kioshi
 Looking better every time I see your work, as an aside the camouflage on ships in the time went below the waterline, there was no fixed demarcation as the black line or colour change gave  a way of measuring distance to a U Boat so sailing with the camo scheme in the water is correct  you may be sailing light anyway
keep up the excellent work
 Ron
Posted by: Pegasus
« on: 15 March 2021, 13:21:05 »

It is difficult to get the ballast correct all the calculations go to pot once you start adding topweight like armament this is more pronounced in Carriers with the island and armament overhanging the hull. It is a fine line to get it correct, however you will succeed no doubt about that. Look forward to you final results.
Posted by: Kiyoshi Sekiguchi
« on: 15 March 2021, 07:29:31 »

Hi Pegasus;
Thank you again for your useful information on balancing method.
I used 4 Lead acid batteries in the very beginning after completion for a trial run
,three were just for ballast and  :(the result was terrible on the water. :(
The cause was found to be high CG(center of gravity) due to the height of the batteries.(12V7Ah)
After the intensive study of this point,I finally came to rely on the lead ingot as shown below of about 10kgs in 4 pieces.The result was seen in my previous video. ::DD  A large improvement of anti-rolling could actually be seen even when steering on the lake where was blown frequently by the wind. :grin1: :(
It was the very first for me to build a comparatively large RC ship like this carrier and
this was a merchant ship modified carrier that hull sides were rather high flat top by which securing a good stability became difficult to do.
As you know,flat top has normally top heavy tendency ... :(
But from coming April,some kind of progress is expected using a Lipo battery or a lighter 2.2Ah sealed battery in exchange for a big sealed battery now in use. :grin1:
1;On the launching day,these 15kgs ballast were set ...
2;The waterline was a little deep and she went on straight forward at middle speed
   comparatively good. :grin1:
3;When she steered hard to port like this.... :'( :'( :'(
4;Present configuration of the ballasts
5;These were set like this on the floor which level was about 5cm below the water line.The thickness of the lead ingot is about 2cm.
6/7;Improved water line 5mm above the planned line in the video and from April I intend to lower 5mm down or so... close to the planned line.!!??? ::) :(
 
Posted by: Pegasus
« on: 14 March 2021, 15:09:37 »

I have found when ballasting I like to start by placing sheet lead at the stern and at the bow keeping it as low to the keel as possible. Then finally placing it midships at the final build. I do this by leaving a hollow space below the battery box. Are you using the lead acid batteries our club uses these now as weights when gluing. By using lipo or nimh and again keeping them as low to the keel this should help reduce roll.
Posted by: Kiyoshi Sekiguchi
« on: 14 March 2021, 13:55:32 »

Hi Pegasus;
A great thanks for your favorable comment.
But the actual movements are not so good as seen in the video... :-\ :'(
It's a fact that she "behaves"much better than ever before,but some times
she behaves like a tomboy on the water.
In this sense,I am seeking for the good stability always on the water fundamentally.
I have a good idea to improve better stability by replacing with more lead ingot
than heavy sealed battery. The ratio between lead ingot and sealed battery will be
adjusted from coming April by which I expect final goal will come into my hands,since
this is the last I can do to get the goal. :grin1: No more idea except the above...
Posted by: Pegasus
« on: 14 March 2021, 11:11:01 »

Looking at the video I think you have got the ballast as best you can have with a 1/96 scale. I have found the larger scale normally sail better my 1/35 scale S boats have little roll even at speed where as my 1/72 flower class does ( the actual Flower Class rolled badly). You have created an excellent model that not only looks good but sails well.
Posted by: Kiyoshi Sekiguchi
« on: 14 March 2021, 01:50:24 »

Seeking for the best stability as an operational RC aircraft carrier model,coming April
will be a new starting point to get the literally completion level as I am expecting her to do it.....I wonder when she could successfully get to the point which I think final and goal of this build,since a good sailing quality is a part of "the build" in my thought..? ;D ::DD
Unless this is accomplished,improvement for the quality may continue...as this is intended as a RC operational model for sailing regularly once or twice a month in my plan from the beginning.
I addition,my local sailing lake is so large for her,stability in many meanings is
indispensable. :)

https://www.youtube.com/watch?v=4f-fI3S6f1E
Posted by: Kiyoshi Sekiguchi
« on: 03 March 2021, 04:06:19 »

Hi all;
My transport trolley for HMS Fencer was finally complete after many modification works
to the ready-made one for transporting her securely and safely to the shore. :grin1:
Posted by: Kiyoshi Sekiguchi
« on: 17 February 2021, 10:09:11 »

Hi all;
I found this trolley on the internet and soon bought for my HMS Fencer.
The size and structure seemed to be just Ok for my image as the transport trolley
to carry the ship to the shore safely.
Of course, some modifications and reinforcement might be necessary to make
it available as an adequate transporter for practically routine use.
A handle and some frames are detachable and max length is about 135cm made of
aluminum.
1/2;new trolley to be modified for use of the transporter.
3/4/5/6;HMS Fencer temporarily loaded on the trolley.
7;present transporter is too noisy! :'( >:D
Posted by: Kiyoshi Sekiguchi
« on: 10 January 2021, 07:06:13 »

Hi all;
I found some real HMS Fencer pics and those of my HMS Fencer taken at nearly the same angles.
1;Real HMS Fencer
2;My HMS Fencer
3;Real HMS Fencer
4;My HMS Fencer

Sailing is interesting, but the Virus has beeeen preventing such activity.
For the time being,do we have to endure and wait in the work shop until the day should come to sail.? :'( >:(

 
Posted by: Kiyoshi Sekiguchi
« on: 07 January 2021, 11:25:38 »

Hi daniel;
A great thanks for your kind reply to my postings. ! :grin1:
Posted by: daniel
« on: 07 January 2021, 10:50:35 »

Always very nice pictures !
Thanks
Posted by: Kiyoshi Sekiguchi
« on: 06 January 2021, 10:52:37 »

Hi all,
Additional 12 rookies are working mostly here.  ;D
But some rookies actually look veterans as to lead already the fighter pilots .!! ::DD