New to forum and new to rc boating, hello all.
Having been into flying for some years , a change was on the cards. After some research the MTB 488 ticked all the boxes for me and after a call to Ron, a trip to Farcet I'm now the proud owner of a new kit.
Now coming from a electric flying background I'm naturally hoping to utilize my motors, lipos and esc's.
I'm aware of certain issues already , no reverse on esc,no cooling on motors/esc's, lipos may be lighter needing extra ballast etc.
Has anyone out there fitted out a MTB style craft on brushless.
My train of thought is guiding me to :- increase volts =low current draw = low heat so with this in mind my motors are around the 800kv spec, esc's are 60amp and my lipo is a 4s 5000mah.
This set up will happily shunt a 9lb mosquito round all day so a 6-7lb MTB with twin 35mm props should be a sinch?
Any thoughts /advise
Thanks
Andy