Post Reply

Warning - There has been no post in this topic for at least 120 days.
Please consider starting a new topic unless you are sure you want to reply.

Note: This post will not be displayed until it has been approved by a moderator.

Name:
Email:
Subject:
Message Icon:
Attach:
(Clear Attachment)
(more attachments)
Allowed file types: gif, jpg, pdf, png, jpeg
Restrictions: 8 per post, maximum total size 800KB, maximum individual size 100KB
Note that any attached files will not be displayed until approved by a moderator.
Verification:
Spammers have become a daily problem that's why we have to revert to such measures, Please enter "OUR" post code (without the space), in the box below, Our Postcode can be found in our Logo at the top of this page:

Shortcuts: Alt+s to submit/post; Alt+p to preview


Topic Summary

Posted by: karlgalster
« on: 03 June 2018, 16:07:30 »

Hi All.
This model was completed some eight years ago and has seen a lot of service. It has sailed many times here in Essex at my club and other local clubs as well as MPBA events at Huddersfield, Burton on Trent and SWA events at Chartwell, Southern Air show and  the International Model Boat Show Warwick.

It has now undergone  change of identity from the German Kriegsmarine Z38 to  the Royal Navy HMS Nonsuch. In 1945 Z38 was handed over to the UK and entered service with the RN as HMS Nonsuch pennant D107. She served about 5 years mainly as a trials vessel and ultimately wrecked in weapons trials and subsequently broken up in 1950.

The transformation into HMS Nonsuch has been straightforward. From photos I have seen the outward appearance was initially in any case, much as it was as Z38 apart from the funnel caps being black and the D107 identities on both bows and stern. I think also that the wartime life rafts were also ditched but I have retained them.

I am hoping to get many years more service out of her and it should be a talking point as is nothing like any other RN destroyer of the immediate post war period.




Posted by: karlgalster
« on: 27 May 2010, 09:52:07 »

Mark, your smoke generator looks good (even if it white).The size and power requirements would not suit a 1/96 destroyer unfortunately. Nice little project for someone to produce a compact generator running on 7.2 volts producing a lot of smoke. ;D
Robin
Posted by: Mark
« on: 27 May 2010, 07:38:41 »

Here is one way of getting smoke;

http://www.youtube.com/watch?v=iAXpWRQQlCY

This is the smoke unit for the G3 that I am building, it's the biggest of it's kind in the world, the only draw back with these units is that they need 24V to run. I have one in my Dreadnought and it looks very realistic.

If you are looking to produce smoke screens then you are into playing with fire!

Mark
Posted by: Tommydean
« on: 27 May 2010, 07:15:45 »

so how does one get the smoke to look real when it comes out of the smoke stack?  every time i have seen smoke done it looks like the "cigarette in the ashtray" look if you know what i mean.  cotton wool soaked in baby oil??? interesting......any pics? is it black?  i was thinking of doing smoke on my HMS Javalin but dont think i can get a realistic looking smoke screen. would a fan inside the ship drafting to baffels in the stack give a more realistic look?
   Tom
Posted by: karlgalster
« on: 26 May 2010, 15:17:55 »

Oliver - thanks for the comments. I have also discovered that Z37 is also a good regatta boat. A bit long so some obstacles can be a bit tricky, however it has two very good features: being narrow compared to a tug for instance it can get through narrow gaps and also being long it goes like an arrow - very true so no twitching about unlike my main steering regatta boat which has twin screws, a mixer and a bow thruster whcih can be a bit of a hand full at times.

Mark - thanks for the warning, I will probably leave the smoke alone as the hull has very little space for a smoke generator and I would need one with fan assistance as nothing worse than a few wisps of white smoke drifting from a warship's funnel although OK for a Clyde Puffer I suppose.

Robin 
Posted by: Mark
« on: 26 May 2010, 09:26:18 »

Yes I had a very good look at these absolutely perfect miniature replica's and I still cannot work out how he has managed such detail.

Robin - Black Smoke - Don't go there or you will have a very realistic Black sooty looking model, remember what goes up usually comes down all over your model. Try burning some cotton wool soaked in Baby Oil, great effect!

Mark
Posted by: hotjava
« on: 26 May 2010, 05:49:43 »

Robin,

She's a beauty!

Oliver
Posted by: karlgalster
« on: 25 May 2010, 17:58:30 »

Colin - the 3.7cm AA looks very realistic congratulations to the builder.
Mark and Tommydean - Thanks guys. A photo low down with a nice bow wave would be a bit special but will take some doing. The mirror is OK for a static model but getting the focus right whilst panning after a moving object is going to take a lot of practice as you say Mark or a lot of luck!! I will have another go some time. Next I need a lot of thick black smoke out of at least one funnel..... ::DD
Robin
Posted by: colin
« on: 25 May 2010, 17:49:59 »

the 3.75's are finished, and i do believe Mark had a good look at them while attending the Intermodellbau this year.

by the way Robin the Barrels are tapered, probably not that noticeable in this photographed position.
Posted by: Tommydean
« on: 25 May 2010, 07:04:33 »

Robin those pics are great. :)  that bow shot....... ^^^
   Tom
Posted by: Mark
« on: 24 May 2010, 19:51:48 »

Hi Robin.

Looking good a bit more practice and you will soon be capturing her at speed.

Mark ^^^
Posted by: karlgalster
« on: 24 May 2010, 12:32:09 »

Hi All
Having completed some more details on Z37 I have attempted to do some water level shots using my digital camera with a mirror attached. Quite difficult to use due to the inverse image and no attempt to do a moving boat shot - will take some practice to get the model both focused and within frame.
Posted by: colin
« on: 14 March 2010, 18:30:52 »

ref the lights, there still digging... but its looking as if the things that were on the funnels were some sort of lights...

the flak's are not finished yet... so i guess he might work on the barrels...

theses items and a lot of his work on the Z6 can be seen in Dortmund at the Intermodellbau..
Posted by: karlgalster
« on: 14 March 2010, 18:23:47 »

Excellent work. Two comments -
Looks as though he has not attempted to taper the barrels of the guns. Actual guns have a pronouced taper about 2 to 1 diameter difference between muzzle and where the barrels enter the breach block.
Did your friend deliberately omit the large exposed to view elevation sprocket wheel mounted between the guns concentric with the main elevation trunnion?
I guess a blank has been drawn on the light/bell objects on the. I will improvise something that looks similar.
Robin
Posted by: colin
« on: 14 March 2010, 17:08:04 »

my friend has been working hard on his double 3,7 cm Flak C 30