Recent Posts

Pages: [1] 2 3 ... 10
1
Customers Builds / Re: HMS Solebay
« Last Post by Railbob on 24 April 2024, 22:27:34 »
Quote from: colin on 24 April 2024, 21:22:37
Sort of hard.. :D  harder than silicone, a bit like rubber..
Over night to dry property ..

It drys clear, waterproof/watertight.. ^^^ ^^^

I do all my portholes with this.. no matter what scale..
Thanks Colin,
                   That's my next purchase.
2
Customers Builds / Re: HMS Solebay
« Last Post by colin on 24 April 2024, 21:22:37 »
Sort of hard.. :D  harder than silicone, a bit like rubber..
Over night to dry property ..

It drys clear, waterproof/watertight.. ^^^ ^^^

I do all my portholes with this.. no matter what scale..
3
Customers Builds / Re: HMS Solebay
« Last Post by Railbob on 24 April 2024, 20:44:41 »
Quote from: colin on 24 April 2024, 06:40:29
These photos show your progression very well  ^^^

You mentioned in your previous post, that you were going to fill the portholes...!
I take it you mean.. clear glazing..

On my Enchantress,  I used ferrules to create the porthole affect, and then filled them with Deluxe "Glue 'N' Glaze"
Thanks Colin, I don’t think I’ll use the ferrules but I’m intrigued by the Deluxe Glue N Glaze, does it become hard and waterproof?

Railbob
4
Customers Builds / Re: HMS Solebay
« Last Post by rondean on 24 April 2024, 09:08:12 »
Quote from: Railbob on 23 April 2024, 16:31:24
Hopefully these will show the progress on Solebay

Hi
Very nice and clean looking construction.
5
Customers Builds / Re: HMS Solebay
« Last Post by colin on 24 April 2024, 06:40:29 »
These photos show your progression very well  ^^^

You mentioned in your previous post, that you were going to fill the portholes...!
I take it you mean.. clear glazing..

On my Enchantress,  I used ferrules to create the porthole affect, and then filled them with Deluxe "Glue 'N' Glaze"
6
Customers Builds / Re: HMS Solebay
« Last Post by Railbob on 23 April 2024, 16:31:24 »
Hopefully these will show the progress on Solebay
7
Customers Builds / Re: HMS Solebay
« Last Post by colin on 23 April 2024, 13:00:14 »
One of the reasons for the problems that you are having regarding posting photos..
They are probably larger that the forum allows, each photo can not be larger that 100kb..

You can either resize them yourself, or send them to me for resizing..

You might find these posts helpful

http://www.deansmarine.co.uk/index.php?topic=587.0
http://www.deansmarine.co.uk/index.php?topic=241.0
8
Customers Builds / Re: HMS Solebay
« Last Post by Railbob on 22 April 2024, 19:36:00 »
A quick update on the build, the R/C system is installed and working nicely, I went for the Radiolink 8ch set with the 2 receivers. The first coat of primer is on the hull and all of the superstructure is built and I'm now doing some finer details such as phones, drains etc. Once I get the hull painted I can fill the portholes and bond the decks down onto the hull. There was some filling and sanding on the main armament but overall the resin kit for them is very nice with some nice details on it that you wouldn't get on vac form. I think another 4/5 weeks and she can be commissioned into my fleet  :)  I cannot seem to post pictures on the forum, I think it's because I use Mac, If anyone can help with this then I have a few to show.
9
Latest News / GRAMPIAN PRIDE rescue vessel refurb
« Last Post by rondean on 15 April 2024, 16:26:22 »
Hi
 Another refurb of the older models in the showroom, this one is approx 12 years old.
 Old 27mg radio and bobs board and motor stripped out and new Nimh batteries, ESC and  motor fitted, linked through 1 x10amp ESC plus a battery for the bow thruster and a lot of ballast.
 We spent a lot of time getting the balance spot on and motor fitted in cradles with foam pads to insulate from the hull, Double coupling,
 Tested on a very windy day. but it was nice a sunny until we got to the lake she handled a treat just as the sun was setting, hoping to get a nice atmospheric shot into the sunset ,
 maybe we can get her out again in the sunshine and no wind.
 Model is  1/48th scale, length 830mm  beam 200mm running on 1 x falcon 5 motor on 6 volt NiMh batterie. and a 108-02 bow thruster on 6 volts
 Regards
 Ron
 see her here on you tubehttps://www.youtube.com/watch?v=mOwMdd4BWrk
10
Customers Builds / Re: HMS Manxman
« Last Post by Scando on 28 March 2024, 07:03:05 »
Thanks gents, appreciate the feedback.
Pages: [1] 2 3 ... 10