Deans Marine

Hints and Tips => Do's and Don'ts => Topic started by: simon2302 on 28 May 2013, 21:24:37

Title: servo motor to run deans trilight
Post by: simon2302 on 28 May 2013, 21:24:37

Iv just started a deans trilight as a side project and wondering how I use a servo to run the motor. Iv stripped the servo im now left with the motor attached to the board with a turny knob thing

Title: Re: servo motor to run deans trilight
Post by: colin on 30 May 2013, 11:31:41

correct,

now attach the motor to the propshaft, with a rubber tube, and plug the cable from the servo into the throttle part of your receiver

the knob thing you can use to centre the throttle command