Posted by: colin
« on: 18 January 2024, 10:57:43 »Well Simon,
You have not given us much information to go on..!
Reicever = any that match your transmitter..
ESC = any that match or is better than the voltage and ampage drawn by the motors..
As for the matter of capacitors, 47 uf from the motor terminals to the motor case, and a 100 uf between the motor terminals.. some DC motors have these capacitors built in..!!
They are only used, so as to reduce electrical noise.. which does come in handy when useing the older radio gear.. when the receiver is situated near the motor..
That said.. place the receiver as far away from electrical noise as possible..
The modern 2.4 GHz Radio gear, is not quite effected in this way..
You have not given us much information to go on..!
Reicever = any that match your transmitter..
ESC = any that match or is better than the voltage and ampage drawn by the motors..
As for the matter of capacitors, 47 uf from the motor terminals to the motor case, and a 100 uf between the motor terminals.. some DC motors have these capacitors built in..!!
They are only used, so as to reduce electrical noise.. which does come in handy when useing the older radio gear.. when the receiver is situated near the motor..
That said.. place the receiver as far away from electrical noise as possible..
The modern 2.4 GHz Radio gear, is not quite effected in this way..