Author Topic: HMS Fencer  (Read 34459 times)

0 Members and 5 Guests are viewing this topic.

Offline Kiyoshi Sekiguchi

  • Lt-Commander
  • *
  • Posts: 140
  • Gender: Male
Re: HMS Fencer's painting was made in this tiny space
« Reply #165 on: 11 February 2020, 07:03:09 »
Hi all the RC ship modellers;
Basic color of grey was painted in a very tiny space as shown below... :wink1:
1;Very narrow space...less than 9 square meters...walls had to be covered as high as 3m as shown..
2;Ready for painting,small assemblies were detached for spraying neatly.
3;idem
4;Dried for next coat
5/6/7;Dried completely
« Last Edit: 11 February 2020, 07:10:12 by Kiyoshi Sekiguchi »

Offline Kiyoshi Sekiguchi

  • Lt-Commander
  • *
  • Posts: 140
  • Gender: Male
Re: HMS Fencer's working vehicles on the flight deck
« Reply #166 on: 14 February 2020, 08:21:00 »
Hi all the Rc ship captains;
Here you see today are the working vehicles working busily on the flight deck.
1;These are 1/87,,,,but they do not seem to be strange as compare with other stuffs for me actually. :-[
2;Like this....
3;Like this...
4;And like this...
5;This one is converted from a miniature fire engine of my grandson,,,,
   who kindly permitted me to do so. Instead I bought an another and more expensive... ;D
6;Even an officer is driving this vehicle due to being busy on the deck,,, ;D
« Last Edit: 14 February 2020, 08:46:03 by Kiyoshi Sekiguchi »

Offline Kiyoshi Sekiguchi

  • Lt-Commander
  • *
  • Posts: 140
  • Gender: Male
Re: HMS Fencer's handmade winches for the sponsons
« Reply #167 on: 17 February 2020, 11:57:34 »
Hi all the Rc ship modellers;
Here you see today are the pics of handmade winches for hull side sponsons.
1;The parts cut out from plastics beam
2; The parts were formed like drums with a file
3;4 sets of winches were complete.! :grin1:
4;Handmade parts except ladders
5;and she also goes today too.,,,, ::DD
« Last Edit: 17 February 2020, 13:28:37 by Kiyoshi Sekiguchi »

Offline Kiyoshi Sekiguchi

  • Lt-Commander
  • *
  • Posts: 140
  • Gender: Male
Re: HMS Fencer's handmade winch fitted on the sponson
« Reply #168 on: 18 February 2020, 07:32:21 »
Hi all the RC ship captains;
The handmade winch was fitted on the starboard sponson as shown below.
1;Handmade winches completed like these.
2/3/4;Fitted on the sponson.Chocks were also handmade with a polystyrene beam and a file.
5;After starboard steering....

Offline Kiyoshi Sekiguchi

  • Lt-Commander
  • *
  • Posts: 140
  • Gender: Male
Re: HMS Fencer's small fittings installed like these
« Reply #169 on: 24 February 2020, 10:06:37 »
Hi all the Rc ship captains;
Small fittings were installed like these on the forecastle and stern.
1;handmade cabinets
2;bollard installed.right is 5 incher.
3;hatches installed additionally
4;stern installed with many fittings
5;idem
6;This main winch was built from kit furnished parts.
7;The water  surface looks more realistic rather than my HMS Fencer?... ;D





« Last Edit: 24 February 2020, 10:10:42 by Kiyoshi Sekiguchi »