As used by Deans Marine in many of the prototype models for testing and demonstration.

We can recommend these units, for when properly installed they have given excellent speed control in our models and as an alternative to the Bobs Board resistance speed controllers.

MARINE 1 
6 volts / 1 amp 
wt 15 gms  29 mm x 34 mm x 5 mm

This unit has been designed to Deans Marine Specifications for use in the COMPACT kits and the smaller lighter models in the range.

This miniature unit weight only 15 gms and gives full proportional speed control in forward and reverse The unit is designed to run on the BEC system in that the power for the R/X AND THE DRIVE MOTOR is taken from the R/X power supply . This unit is waterproof and features one touch set-up, and is prewired with a plug.
 

MARINE 3 and MARINE 5
6 volts to 12 volts / 3 or 5 amps
wt 20 gms  35 mm x 36 mm

This Unit is aimed at the constructor of the fast launches and large merchant ships in the range. At the heart of the system is a microprocessor that gives forward & reverse plus smooth speed control throughout the full range.
The system can be used as BEC speed controller or by a simple modification used with a separate power supply for the R/X. The MARINE is fitted with the up-to-the -minute GEN-R FET technology which is at the heart of the best ESP units.
Operating range 6 volts to 12 volts continuous current maximum 3 or 5 amps . This unit is waterproof and features one touch set-up, and is prewired with a plug. The unit can be fitted with water cooling if required.

MARINE 10 and 15
6 volts to 12 volts / 10 or 15 amps
wt 20 gms  35 mm x 36 mm

This Unit is aimed at the constructor of the big fast launches and very large semi-kits and in our range.
At the heart of the system is a microprocessor that gives fully proportional reverse and smooth speed control throughout the full range. The system can be used as BEC speed controller or by a simple modification used with a separate power supply for the R/X Operating range 6 volts to 12 volts continuous current 10 / 15 amps . This unit is waterproof and features one touch set-up, and is prewired with a plug. The unit can be fitted with water cooling if required.