Produced by us to our own design. Designed for smooth running an long life, used in all our kits for over 21 years. Separate bearings. Hard brass tubes. Stainless steel shafts. Fitted with nylon thrust washers and oiler tubes.

PR1
Bright steel 3.5” tube fitted with PTFE bearings at both ends. The outboard end of the tube has a moulded hard nylon skeg /bearing holder fitted onto the tube
The steel shaft is fitted with a brass bush to take a M4 thread, the inboard carries a silicone waterseal and a silicone reverse locking collar and is extended to 1” above the tube length and is of 2mm dia.
This unit is ideal for small fast lightweight hulls and the micro class fast electric’s or any scale model where a large propshaft would be intrusive.

PR2
Bright steel 5.5” tube fitted with BRASS sintered bearings at both ends.
The outboard end of the tube has a moulded hard nylon skeg fitted onto the tube
The steel shaft is fitted with a brass bush to take a M4 thread, the inboard carries a reverse locking collar.
The shaft is extended to 1” above the tube length and is of 2mm dia. This unit is ideal for small fast lightweight hulls and the MINI class fast electric’s or any scale model where a large propshaft would be intrusive.

PR3
Bright steel 6.75” heavyweight tube fitted with BRASS sintered bearings at both ends.
The outboard end of the tube has a moulded hard nylon skeg fitted onto the tube
The steel shaft is a M4 thread, the inboard carries a reverse locking collar and a nylon oiler unit is also attached
The shaft is extended to 2.5” above the tube length and is of 4mm dia.
This unit is ideal for fast hulls when a serious amount of power is needed to be passed through the shaft.

PR4
Bright steel 6” heavyweight tube fitted with BRASS sintered bearing at the outboard end of the tube and has a moulded hard nylon skeg fitted onto the tube
The steel shaft is a M4 thread, the inboard is fitted with a motor mounting and a universal coupling with a shaft dia of 1.8th” and a nylon oiler unit is also attached. This unit will take all standard 540 type motors
This unit is ideal for fast hulls when a serious amount of power is needed to be passed through the shaft and space limitations prohibit the fitting of a normal coupling and motor mount set up.

Mini Props and Propschafts

MINI PROPSHAFT std
2mm Thread propshaft fitted in to a 1500mm long 4mm tube, the tube is fitted with water lubricated nylon bearings with a support skeg at the outboard end, the inboard end of the tube is fitted with a oiling cup and a locking ring. Also included with this unit is a prong type single coupling for free running complete with its opposite par for fitting to a motor, complete with a 2mmm drive shaft hole and a locking screw.

MINI PROPSHAFT super
2mm Thread propshaft fitted in to a 1500mm long 4mm tube, the tube is fitted with MINIATURE NEEDLE ROLLER bearings with a support skeg at the outboard end, the inboard end of the tube is fitted with a oiling cup and a locking ring. Also included with this unit is a prong type single coupling for free running complete with its opposite par for fitting to a motor, complete with a 2mmm drive shaft hole and a locking screw.

Mini props.
A new range of 3 bladed high efficiency propellers with a 2mm threaded insert, mould in high strength nylon for long life Size range 18-21-23-25-28mm all in L & R/H styles.