Designed for use by the professional modeller, the sets of brass etchings are from our newest range of kits. These sheets can be purchased as separate items and contain a huge selection of small parts to add the super detail to your merchant ship or warship.

Brass etched sheet from the following kits are available: HANNIBAL, KOMET, GUERNSEY, LIS TERKOL, MANXMAN A photocopy of the sheets for the relevant kits is available on receipt of 4, 1st class stamps (UK only)

BE-1  
Designed for use by the professional modeller, this set of brass etchings contains a huge selection of small parts to add the super detail to your destroyer model.
A small selection of the parts included on a sheet are
Jacobs ladders, d.c rails, folding seats, shell nets, oerlikon dial sights and shoulder rests, companionways, ring bolts, engine room vents, vertical ladders, leadsmans platforms, propellor guards, torpedo firing levers and nose whiskers, etc.

BE-2 Brass etched stanchion sets.
As used in our standard kits. These stanchions are etched in 12th spring brass for ease of fitting in deck by heat sinking.

Sping brass gives them the ability to take lights and be returned to shape

6 lengths on a fret giving a approx. total of 48"


BE-3 Brass etched single stanchion.
These individual stanchions are for the professional glasscase modeller and those that require finer detail on ship models.

Admiralty pattern stanchions in two & three rail format with support legs.

Approx 170 stanchions in a set

These stanchions are etched in 12th spring brass for ease of fitting in deck by drilling or heat sinking. See fine brass cold drawn wire for wires.


BE-4   Brass etched vertical ladders

Vertical brass etched ladders. 4 mm width in 3" & 4.5" lengths. 11 lengths on a fret.

BE-5 standard pattern 1 mast

Standard mast as fitted to many types of destroyers and frigate during and after W.W.II

Brass etched for ease of construction this set includes ladders and platforms.

BE-6 Yagi array
“Fishbone” radar aerials as fitted to many gunnery radar’s on warships.
This brass etching includes the fishbone aerials and the sides frames or supports
Makes easy work of a very difficult item to construct.


BE-7 Rigging blocks
A set of brass etched rigging blocks to add that right touch of fine detail to the rigging of many 1/96 scale models.